Skip to content
GitLab
Commit 71d78094 authored by Achim Morschhauser's avatar Achim Morschhauser
Browse files

Init run adapted

parent 4263d70d
Hide whitespace changes
Inline Side-by-side
src/driver_obs_obsdaq.cpp
View file @ 71d78094
......@@ -987,105 +987,111 @@ int driver_obs_obsdaq::init() {
***************************************************************************/
int driver_obs_obsdaq::init_run(double freq){
// The receive buffer
char buf[200];
// A command to send
char cmd[20];
// Index of the selected frequency
int freq_sel;
// ADC calibration
int adc_scale, adc_offset;
/////////////////////////////////////////////////////////////////////
//
// Set frequency.
//
/////////////////////////////////////////////////////////////////////
// Set triggering off
send("#PP00000000");
usleep(1e6);
// The receive buffer
char buf[200];
// A command to send
char cmd[20];
// Index of the selected frequency
int freq_sel;
// Find the closest possible valid frequency lower or equal to the one
// requested.
for (int i=0; i<valid_filter_rates_num; i++){
if (valid_filter_rates[i]>freq){
freq_sel=i;
break;
}
}
// ADC calibration
int adc_scale, adc_offset;
// Set range to +10V and set frequency of digital filter
for (int i=0; i<3; i++){
sprintf(cmd,"$%1dWS020102%s",i,filter_cmds[freq_sel]);
send(cmd); waitanswer(5);
}
/////////////////////////////////////////////////////////////////////
//
// Set frequency.
//
/////////////////////////////////////////////////////////////////////
// Print used and requested frequency
fprintf(stderr,"Frequency set to: %6.2f Hz. "
"Requested frequency: %6.2f Hz.\n",
valid_filter_rates[freq_sel],freq);
// Set triggering off
//TODO Check if necessary here
send("#PP00000000");
usleep(1e6);
/////////////////////////////////////////////////////////////////////////
//
// Calibrate.
//
/////////////////////////////////////////////////////////////////////////
// Find the closest possible valid frequency larger or equal to
// the one requested.
for (int i=0; i<valid_filter_rates_num; i++){
if (valid_filter_rates[i]>=freq){
freq_sel = i;
break;
}
}
// Iterate over all three channels
for (int i=0; i<3; i++){
// Set range to +10V and set frequency of digital filter
for (int i=0; i<3; i++){
sprintf(cmd,"$%1dWS020102%s",i,filter_cmds[freq_sel]);
send(cmd); waitanswer(5);
}
int config=0;
// Print used and requested frequency
fprintf(stderr,"Frequency set to: %6.2f Hz. "
"Requested frequency: %6.2f Hz.\n",
valid_filter_rates[freq_sel],freq);
// Get current 24-bit configuration (Manual 12.4.9)
sprintf(cmd,"$%1dRS",i);
send(cmd);
receive(buf,sizeof(buf),1);
fprintf(stderr,"REC_CONFIG: %s\n",buf);
/////////////////////////////////////////////////////////////////////////
//
// Calibrate.
//
/////////////////////////////////////////////////////////////////////////
// Get the last four bytes ("ccdd") and add channel number
config= (i<<16) + strtoul(&buf[7],NULL,16);
// Iterate over all three channels
for (int i=0; i<3; i++){
// Check if calibration for the given config
// was pre-determined
if (driver_obs::cal->get_adc_calibrate
(&adc_offset, &adc_scale, config)<0){
int config=0;
// Get current 24-bit configuration (Manual 12.4.9)
usleep(0.5*1e6);
flush();
sprintf(cmd,"$%1dRS",i);
send(cmd);
receive(buf,sizeof(buf),1);
fprintf(stderr,"REC_CONFIG: %s\n",buf);
// Automatic Calibration
//auto_calibrate(i,1);
// Get the last four bytes ("ccdd") and add channel number
config= (i<<16) + strtoul(&buf[7],NULL,16);
} else {
// Check if calibration for the given config
// was pre-determined
if (driver_obs::cal->get_adc_calibrate
(&adc_offset, &adc_scale, config)<0){
// Set the pre-determined calibration constant
sprintf(cmd,"$%1dWO%06X",i,adc_offset);
send(cmd); waitanswer(5);
sprintf(cmd,"$%1dWF%06X",i,adc_scale);
send(cmd); waitanswer(5);
// Automatic Calibration
// auto_calibrate(i,1);
}
} else {
//printf("============ GOT: %06X %06X\n",adc_offset,adc_scale);
// Set the pre-determined calibration constant
sprintf(cmd,"$%1dWO%06X",i,adc_offset);
send(cmd); waitanswer(5);
sprintf(cmd,"$%1dWF%06X",i,adc_scale);
send(cmd); waitanswer(5);
}
//printf("============ GOT: %06X %06X\n",adc_offset,adc_scale);
}
/////////////////////////////////////////////////////////////////////////
//
// Set the scaling parameter (Manual 12.5.1).
//
/////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////
//
// Set the scaling parameter (Manual 12.5.1).
//
/////////////////////////////////////////////////////////////////////////
//TODO Automatically set the calibration parameters
// Set the conversion parameters
//FULLSCALE=42.5; // Self-Gain calibration
//FULLSCALE=40.0; // System-Gain calibration
//TODO Automatically set the calibration parameters
// Set the conversion parameters
//FULLSCALE=42.5; // Self-Gain calibration
//FULLSCALE=40.0; // System-Gain calibration
//GAIN=4.0; // +/- 10V range
//GAIN=8.0; // +/- 5V range
//GAIN=4.0; // +/- 10V range
//GAIN=8.0; // +/- 5V range
M = 40.0 / 4.0 / (double) 0x800000;
//printf("M: %f\n",M);
M = 40.0 / 4.0 / (double) 0x800000;
//printf("M: %f\n",M);
return(0);
}
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment